|
MATERIALS |
COLOUR CODE |
AISI/ BS |
W.Nr DIN |
DESCRIPTION/ APPLICATION |
FORMS AVAILABLE |
|
HOLLOW BAR
Download PDF |
|
BS 6258
Gr 690
|
1.5217
20 Mn V6 |
Plain Carbon Steel readily welded, flame cut, hot or cold worked and machinable. Hydraulic cylinders, shafts, gear wheels, axles, rolls, mechanical components etc& SKF 280 equivalent. |
32 od x 16 id
to
273 od x 233 id |
|
HOLLOW BAR
Download PDF |
|
AISI 1026
A-53
A-106 |
|
Heavy wall, unalloyed low carbon steel. Readily welded...Available on INDENT |
73od x 34id
to
660odx 508id |
|
HOLLOW BAR
Download PDF
|
|
4140-4142 |
|
Usually supplied in the annealed condition. Can be through hardened , flame / induction hardened. Suitable for NITRIDING after through hardening.
Available on INDENT |
152odx 115id
to
508odx 356id |
|
CM 55
St 52.3 |
PINK / BLUE |
1055 |
St52-3
|
CM55 is a fine grain medium carbon steel with uts 755Mpa (approx). St 52.3 is a low carbon normalized, weldable steel with uts 490 Mpa (approx). Both grades suitable for back plates, support rails etc. CM55 can be through and flame hardened. |
Plates
Blocks
Rounds
Available on
INDENT |
|
COPPER ALLOY 110
Download PDF |
BLUE |
C11000 |
|
High conductivity Copper for electrical discharge machining and other electrical application. |
Rounds
ø 9.3mm -
ø 203mm
Flats
6-152 mm t
Squares
25-152 mm |
|
UDDALLOY
NEW
Download PDF |
|
|
|
SPRAY FORMED
ALUMINIUM BRONZE
Please visit Uddeholm Tooling WEB link .
For general engineering, marine
engineering and equipment
manufacture. (Wiper dies for bending stainless steel tubes).
Spinning tools and rolls., drawing
and deep drawing tools. |
Available on
INDENT |
|
UDDEHOLM
MOLDMAX HH
Download PDF
BERYLLIUM COPPER |
FLURO ORANGE |
|
|
High strength Beryllium Copper, mould alloy. Good corrosion & wear resistance and polishability. Used in cores and inserts for rapid heat removal and minimizing product distortion. Supply hardness 40 Rc. |
Rounds
ø 12 - ø 152
Flat
12.7 - 50.8 mm t
|
|
UDDEHOLM
MOLDMAX XL
Download PDF |
|
|
|
High strength, high thermal conductivity copper alloy.
Has no Beryllium.
Supply condition
28-32 HRC hardness. |
Available on INDENT |
|
UDDEHOLM
PROTHERM
Download PDF |
|
|
|
Moderate strength
Beryylium copper.
Extremely high thermal conductivity.
Supply condition about 190 HB hardness |
Available
on INDENT |
|
ALUMEC 89 TOOLING ALUMINIUM
Download PDF |
GREEN |
7079 mod.
7075
mod. |
3.43345
mod.
3.4365
mod. |
High strength, hot rolled, heat treated aluminium alloy, cold stretched for maximum stress relieving. For blow moulds, vacuum moulds, rubber moulds, injection moulding of thermoplastics. Can be hard anodized or chrome plated. |
Rounds
ø 19 - ø 300
Plate
10 - 200mm t
|
|
GAUGE PLATE (GROUND FLAT STOCK) |
|
01 |
|
Oil hardening, dimensionally stable tool steel avail. In precision ground stock in 500 mm lengths. Cutting tools and dies, machine jigs and fixtures. |
Flats
1 - 25 mm t
Squares
10 - 20 mmt |
|
SILVER STEEL |
|
W1 |
|
Annealed ground and polished to h8 water hardening steel for twist drills ejectors, punches. |
Rounds
1/8" - 1"
ø 3 - ø 25
|
|
TITANIUM |
|
6A1-4V |
|
High strength Titanium for structural components, marine fittings, fasteners. |
Rounds
ø 1/2" - ø 6"
Plate
1/4" - 1.50" |
